top of page

The PPprint PRO Surface is the most optimized printing surface for 3D printing polypropylene. Newly developed by PPprint, this surface will minimize nearly all warping issues for your prints. It is suggested to use the P-cleaner every 5 prints in order to renew the surface for optimal prininting results. We also suggest at least a 10mm brim on all of your PP parts. 



330mm x 340mm 


Print Settings:

Bed Temp - 70degC for the first three layers, then OFF for the rest of the print

***Heat the bed surface up to 100degC for 10 minutes before trying to remove the print from the bed!

PPprint PRO Surface

    bottom of page